Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: Neutral - A Bit Of A Pig...

  1. #1
    Evil Twin Rhodeseeker's Avatar
    Join Date
    Jul 2009
    Location
    Lancashire
    Posts
    287

    Neutral - A Bit Of A Pig...

    Anyone got any solution to my neutral problem? When i stop at lights etc. its a real pig to find neutral, in fact most occasions it wont find it at all. If i try and find it whilst still moving & rolling to the lights i can find it, I also can if i hit the kill switch. why cant i when its running but stood still?

  2. #2
    BB1000
    Guest
    Have you changed the oil jet......look at the how to forum i put i post in there of what ya need ..... cost about 10

  3. #3
    amb67
    Guest
    Make sure your chain tension is set correctly first, when they are set too slack neutral can be a right bar steward to find.

    Also worth seeing if bleeding your clutch will help, mine lets in air overtime and neutral becomes an issue then.

  4. #4
    Evil Twin Rhodeseeker's Avatar
    Join Date
    Jul 2009
    Location
    Lancashire
    Posts
    287
    Thanks m8, will have a look..

  5. #5
    jonty
    Guest
    did my oil jet on mine it was a peice of pi$$
    im finding neutal alot better

  6. #6
    AMA Pit Boss supertedlover's Avatar
    Join Date
    Mar 2008
    Location
    Lincolnshire
    Posts
    2,903
    sprocks did mine, still waiting for him to come do my mpl, slack bastaard
    jet40 works , get it done

  7. #7
    Evil Twin Rhodeseeker's Avatar
    Join Date
    Jul 2009
    Location
    Lancashire
    Posts
    287
    BB, it appears from all the replys etc. that the jet could take some time after ordering. Did anyone find a quick / easy supplier? Thanks

  8. #8
    kawasakiinit
    Guest
    Did my jet mate made a big difference

    06 ONWARD HAD THE SMALLER JET AS STANDARD I THINK.........

  9. #9
    fusebox
    Guest
    jets are in stock mate! no worries gimme a call anytime and i'll bosh one in the post to ya!1
    Dead easy to get hold of and to fit!
    Cheers
    griff

  10. #10
    Evil Twin Rhodeseeker's Avatar
    Join Date
    Jul 2009
    Location
    Lancashire
    Posts
    287
    Thanks Griff, but got one the next day...

    Fitting it tomorrow night, ready for weekend and hopefully a bit of rest on the wristy's....

    Much Appreciated Anyway..............

  11. #11
    fusebox
    Guest
    your welcome mate!!

    please let us know if it works out well for ya!!

    cheers
    Griff

  12. #12
    GottaHurt
    Guest
    Griff .. I'm looking for an oil jet and rear brake heat shield for an 04 Mille . And MPL slave too . I'm in Dublin .. Can we arrange something ?

  13. #13
    Mini_Me
    Guest
    The newer type RSV en tuono's have the smaller jet as stock. that is the reason why the smaller jet excists, as a replacement part for the nwer engines.

    In my experience 90% of all neutral/clutch drag problems are from air in the system. Many bleed the system but in the wrong way. The aprilia system is kind of a bitch to bleed properly.

    Look at the AF1 forum under the technical section for a post by KZmille on how to bleed the bugger.

  14. #14
    fusebox
    Guest
    bleeding the clutch circuit is defo the best fix for the difficult clutch mate for sure, if its still difficult to get neutral then a clutchjet works a peach.....the smaller jets are fitted as standard in the 06 onwards bikes mate!!

    if you need one dude just call me or zoe and we'll bosh one in the post no worries!!!

    let us know!!!

    Cheers
    Griff

  15. #15
    pieman
    Guest
    when Griff tuned my engine and took the slack out of my cables it made it a lot easier to get neutral!

  16. #16
    Evil Twin Rhodeseeker's Avatar
    Join Date
    Jul 2009
    Location
    Lancashire
    Posts
    287
    Fitted the Jet yesterday, but not been out on her yet. Will give her a test on Saturday and report back the verdict.. Thanks..

  17. #17
    Evil Twin Rhodeseeker's Avatar
    Join Date
    Jul 2009
    Location
    Lancashire
    Posts
    287
    Been out today after fitting the Jet40 and have found neutral easier. Still not perfect like a jap would be, but happy to live with what i have now versus what i had before. At least i can now rest my wrists at every lights which is all i wanted. Thanks Chaps...

  18. #18
    Wes
    Wes is offline
    Baby Twin Wes's Avatar
    Join Date
    Nov 2008
    Location
    Toronto
    Posts
    31
    I have had the same issue finding neutral. I find downshifting into 1st thin an ever so slight pressure up to neutral. the odd time a quick tap back down to neutral from second when it skips.
    What is an oil jet?

  19. #19
    Evil Twin Rhodeseeker's Avatar
    Join Date
    Jul 2009
    Location
    Lancashire
    Posts
    287
    Hi mate, check out the 'Common Modifications Section' and look up the Neutral Thread. Full Expo...

  20. #20
    Baby Twin
    Join Date
    Jul 2016
    Location
    Cranfield
    Posts
    1
    Griff, new to forum but in desperate need of this jet mod for a 2010 RSVR

    I've OBeron'd my RSVR but still not happy with the neutral world.
    Hope to god your in the UK

    And based on the age gap of these original posts still doing all things Aprila!

    Many thanks

Page 1 of 2 12 LastLast

Similar Discussions

  1. Knocking in neutral
    By RSV 69 in forum Aprilia RSVR
    Replies: 1
    Last Post: April 10th, 2012, 02:11 PM
  2. neutral
    By cringer in forum Aprilia RSVR
    Replies: 3
    Last Post: April 4th, 2011, 01:57 AM
  3. false neutral
    By a.darcy in forum Aprilia RSVR
    Replies: 1
    Last Post: January 23rd, 2011, 11:34 AM
  4. Neutral
    By Si600 in forum Aprilia RSVR
    Replies: 7
    Last Post: August 21st, 2009, 12:54 AM
  5. neutral
    By p.ludlow in forum Aprilia RSVR
    Replies: 20
    Last Post: December 5th, 2008, 06:39 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •