Results 1 to 12 of 12

Thread: gear indicator?

  1. #1
    Baby Twin
    Join Date
    Jan 2011
    Posts
    40

    gear indicator?

    hi,
    im hoping that someone on here will be able to help me with wiring a gear indicator into my rsv. it has 3 wires all different colours, one orange one red and the last one black. please can you tell me which wires to attach these to and where.
    i think the indicator is a datatool item.

    many thanks
    tristan

  2. #2
    Superbike Twin Dynamo's Avatar
    Join Date
    Oct 2010
    Location
    Edinburgh
    Posts
    141
    Only 3 colours?

    My datatool digi has 6 wires

    Datatool have info on thier site for the tuono but im not sure it is the same

    And each rsv has different wiring which makes it harder still

  3. #3
    Baby Twin
    Join Date
    Jan 2011
    Posts
    40
    ok thanks dynamo,

    why cant italian wiring be simple?? i will check the datatool website for details.

  4. #4
    Baby Twin RussRSV's Avatar
    Join Date
    Oct 2010
    Posts
    74
    My digi also has 6 wires. The instuctions were all wrong and l had to sort it out myself but got there in the end.

    I've got it all writen down somewhere so if you get stuck let me know but there should be 6 wires.

    Russ

  5. #5
    Baby Twin
    Join Date
    Jan 2011
    Posts
    40
    ah after stripping the outer casing of the wires back i have found another 3 wires so that is 6 in total. and russ if you could send me any details of how to fit it to the rsv that would be ace.
    thanks tris

  6. #6
    Superbike Twin Dynamo's Avatar
    Join Date
    Oct 2010
    Location
    Edinburgh
    Posts
    141
    What year is ur rsv?

    I done the wifes 08 tuono last night and im sure its was the same as my 08 rsv

    All the wiring needs ran to under the back seat except the orange wire which needs to go to an earth somewhere,

    You will need at least 8m wire , solder iron,heat shrink or good tape and cable ties

    Connections for a later tuono and probably the later rsv also

    Black is groung/negative goes to battery or dark blue to tail light
    red is ingnition live and you connect that to the yellow that goes to the tail light
    yellow is the tachopulse and that goes to connector a pin 33 grey/red
    green is the speedo pulse and goes to connector b pin 6 grey/white
    brown is the neutral lightand goes to connector b pin 40 heavy black
    and orange is the learner wire

    Once connected switch the ignition on and hold the orange wire to earth till the reading shows flashing p

    disconnect the orange wire and touch it on and off till you see 6 showing on the digi, it will go 1 2 3 4 5 6 as you touch it

    Then start the bike in neutral then drop into first and rev the bike over 2000 revs till the 1 flashes faster then goes to a bar

    change gear to neutral and pause then move to second and rev to over 200 till again the 2 flashes fast and changes to a bar

    Do this for all gears

    Voila

    P.s. if your bike is an old slow one then disregard the above lol

  7. #7
    Baby Twin
    Join Date
    Jan 2011
    Posts
    40
    hi dynamo im afraid i have the old slow rsv its an 02 grey/silver red and black one. i have found some basic fitting instructions on the datatool website. if anyone has a description like yours but for my 02 rsv i would really appreciate it.
    many thanks tris

  8. #8
    Superbike Twin Dynamo's Avatar
    Join Date
    Oct 2010
    Location
    Edinburgh
    Posts
    141
    Did you find this

    http://www.datatool.co.uk/consumer/s...&action=search

    Look at the electronic one and the movie might help

    And here is the wiring spec, its even easier on yours its all behind the clocks


    Digi/Revlight Info for an 02 rsv

    Tacho pulse Grey/VioletLoom to back of clocks......... yellow on digi

    Speedo pulse Blue/OrangeLoom to back of clocks...... green on digi

    NeutralBrownLoom to back of clocks........................ brown on digi

    Ignition supply GreenLoom to back of clocks.............. red on digi

    EarthDark BlueLoom to back of clocks .......................black on digi

    And orange is the learn wire
    Last edited by Dynamo; February 19th, 2011 at 09:20 AM.

  9. #9
    Baby Twin RussRSV's Avatar
    Join Date
    Oct 2010
    Posts
    74
    Dynamo
    Have you sorted it yet. My bike's in paint at the moment so l can't check it.

    I have 2 lots of information and l can't remember which one is correct. 1 is as above the other is different.

    Let me know how you're getting on.

    Russ

  10. #10
    Superbike Twin Dynamo's Avatar
    Join Date
    Oct 2010
    Location
    Edinburgh
    Posts
    141
    The top instruction are for a 07 rsv factory and tuono

    The bottom one is for an 02 rsv

    both off the datatool site

  11. #11
    Baby Twin RussRSV's Avatar
    Join Date
    Oct 2010
    Posts
    74
    Right

    The other details l have are as follows for the 01/02 Mille

    Ignition - Green
    Neutral - Brown/Pink
    Speedo - Grey/White
    Tacho - Grey/Violet
    Earth - Dark Blue

    All connections are behind the clocks.

    Hope this helps.

  12. #12
    Baby Twin
    Join Date
    Dec 2014
    Location
    Asia
    Posts
    81
    <div style="width:100%;height:0px;position:relative;padding-bottom:176.847%;"><iframe src="https://streamable.com/s/ig9ou/brwnle?autoplay=1" frameborder="0" width="100%" height="100%" allowfullscreen style="width:100%;height:100%;position:absolute;left:0px;top:0px;overflow:hidden;"></iframe></div>


    https://streamable.com/ig9ou

    https://streamable.com/ig9ou

    on behalf of my friend bike.. the triangle light is blinking every time he rev the engine (gear sensor as i recall), so which part shud he looking for? the gear sensor?

Similar Discussions

  1. Gear Indicator
    By neilo in forum Aprilia RSVR
    Replies: 0
    Last Post: February 25th, 2013, 10:35 AM
  2. Gpt gear indicator.....
    By andirsv in forum Classifieds
    Replies: 8
    Last Post: August 5th, 2012, 03:36 AM
  3. gear indicator
    By floakey in forum Aprilia RSVR
    Replies: 2
    Last Post: May 13th, 2011, 03:52 PM
  4. Gear indicator
    By Ken in forum Aprilia RSVR
    Replies: 13
    Last Post: February 14th, 2010, 10:40 AM
  5. Gear Indicator
    By pdoney in forum Aprilia RSVR
    Replies: 4
    Last Post: October 4th, 2009, 11:12 AM

Search tags for this page

Click on a term to search for related topics.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •