Results 1 to 8 of 8

Thread: Cutting out at high revs!

  1. #1
    Baby Twin
    Join Date
    Apr 2011
    Location
    Kent, UK
    Posts
    15

    Cutting out at high revs!

    Hello guys,

    I'm very new to this but had mille for a little while and donít seem to have much luck!
    Anyways had my first track day today only to brake down after the warm up lap!

    The problem, cutting out after reaching 6-10k revs and then the revs drop to below 0 and power cuts out to nothing. Then the right hand screen reads Diag '1'
    After about 30 seconds turn key on -off she'll start up again but problem persists

    If anyone can help me diagnose this Iíd be very grateful!

    Rob

  2. #2
    Baby Twin
    Join Date
    Jul 2011
    Location
    Peterborough
    Posts
    32
    Do you have an alarm? Also, search for the side-stand switch issue on here.

  3. #3
    Superbike Twin
    Join Date
    Dec 2009
    Location
    Galati, Romania
    Posts
    246
    i've had the same thing happen to me. it was the sidestand switch, it is worth taking a look at...

  4. #4
    Baby Twin
    Join Date
    Apr 2011
    Location
    Kent, UK
    Posts
    15
    Quote Originally Posted by stress View Post
    i've had the same thing happen to me. it was the sidestand switch, it is worth taking a look at...
    Thanks guys I will investigate the side stand switch, but strange how it happens at high revs every time? I rang my local Aprilia dealership today and he said check all connections especially the ones at the back with the relays. so will do that too.

    'Stress' was the symptoms exactly the same then, as I described?

  5. #5
    One Liter Duc Eater Carbon Kid's Avatar
    Join Date
    Oct 2010
    Posts
    646
    its the throttle postion sensor matey, (diag 1) if it revs a bit then dies.
    ck

  6. #6
    Superbike Twin
    Join Date
    Dec 2009
    Location
    Galati, Romania
    Posts
    246
    yes but i didn't have diag 1 on my dash. it was one of the wires on my sidestand switch, it got torn a little bit and as the vibrations increased, the bike turned off...

  7. #7
    Baby Twin
    Join Date
    Apr 2011
    Location
    Kent, UK
    Posts
    15
    Quote Originally Posted by Carbon Kid View Post
    its the throttle postion sensor matey, (diag 1) if it revs a bit then dies.
    ck
    Thanks! i did that today and seems to have sorted it!

    I check every connection i could too, but seems that i needed to calibrate the TPS back to 0 on the LCD.
    Cheers for all the in put.

  8. #8
    One Liter Duc Eater Carbon Kid's Avatar
    Join Date
    Oct 2010
    Posts
    646
    Ive had tps and cps go onmy 02, tge tps twice.. Arg. Atleast its an easy fix
    ck

Similar Discussions

  1. Engine Vibration High Revs
    By cranked in forum Aprilia RSVR
    Replies: 38
    Last Post: October 7th, 2009, 03:33 AM
  2. why does my rsv engine splutter at 10,000 revs
    By foggy 99 in forum Aprilia RSVR
    Replies: 19
    Last Post: September 18th, 2009, 07:40 AM
  3. Cutting out at low revs when cold
    By danf1234 in forum Aprilia RSVR
    Replies: 9
    Last Post: June 3rd, 2009, 02:06 PM
  4. High revs when changing gear
    By Kiwi_rsvr in forum Aprilia RSVR
    Replies: 13
    Last Post: February 24th, 2009, 12:30 PM
  5. low revs
    By millelatts in forum Aprilia RSVR
    Replies: 16
    Last Post: April 16th, 2008, 01:57 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •