Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: Power Commander Tuono / RSV different part number?

  1. #1
    crasher76
    Guest

    Power Commander Tuono / RSV different part number?

    without thinking i bid and won a PC III for a Tuono 03-05, thinking it would fit my RSV Mille 2002 (same engine etc) Looking on PC website the part number is different as is the RSV-R.

    Any ideas why there are 3 different part numbers for the same engine / chassis?

    I will probably plug it in and hope for the best...

  2. #2
    Superbike Twin
    Join Date
    Jun 2007
    Location
    1
    Posts
    219
    if the connections are the same your alright mate its the map on it that will give it a different part number i think

    just make sure the connections are right for the ecu

  3. #3
    Superbike Twin
    Join Date
    Feb 2009
    Location
    Peterborough
    Posts
    228
    have a 2002 mille (not R) and My pc3 ordered from rsvr.net has also tuono 2005 sticker. not a major problem as it will be setup when it goes to the dynoroom...

  4. #4
    DrRossi
    Guest
    Great if you don't think !!
    Life is so much easier.

    It will work just fine.

    Where did you get it?

  5. #5
    crasher76
    Guest
    I agree, thinking is a major problem in my life! The only reason i ask is the FAQ on the powercommander website mention maps for different models / manufacturers cannot be downloaded on to the PC.

    I got it on ebay for 100 + 10postage, which is pretty reasonable.

  6. #6
    Beanie
    Guest
    Once you get it, you plug it into the pc, using a battery adapter, then go to the pc website, and download the map directly into the unit. then plug it back into the bike and job is done.

    Good luck, you won't look back.

  7. #7
    Moggi
    Guest

    Talking

    I've got a Tuono Racing but bought a used PC3 for a Mille. No problem though as I was getting it mapped anyway!

  8. #8
    mattblack
    Guest
    Yo Beanie, whats a battery adapter ? Iv'e done exactly the same as Crasher76. Can I connect the wire tap and then download the new map before I connect the injectors ?

  9. #9
    crasher76
    Guest
    Hi, it is a 9v aux power supply that plugs into the big plug on the pc3. I did this before installing on the bike to check it took a rsv map ok rather then waste my time fitting! I also updated the firmware and managed to crash it until i reloaded everything - glad it wasn't on the bike when i did that!
    the tuono / rsv install instructions are slightly different - something to do with the trace wire being a different colour.

  10. #10
    mattblack
    Guest
    Hi Crasher,

    Do you mean the 9 pin plug on the back of the pc3 ? How much do the 9v adapter's cost do you know? and what do you mean about the wires being different colours on the Tuno. Soz for all the questions but I know bugger all about this type of thing lol.

    Cheers

  11. #11
    camngetit
    Guest
    hes not lying he doesnt if i plug the wires in wrong i might be able to keep up

  12. #12
    crasher76
    Guest
    no worries! i think you can buy it for about a tenner, look on Pc website. If you go to the yank website powercommander.com you can download pdf installation instruction for both Tuono and RSV, It may have been a typo but the tuono has a grey wire with orange trace and the rsv has an orange wire with grey trace (or vice versa) you can also download all maps in one hit from the yank website (it has maps for european supplied bikes) choose the map that meets your spec closest.

    I wouldn't worry my PC had a sticker with part nos for all aprilias the PC works on Futura, Falco, tuono etc.

  13. #13
    mattblack
    Guest
    Cheers Crasher.

    Did you get all that Camngetit, apparently I need a falangy and my whirly valve will boost the turbo isolator ?? Anyay you couldn't keep up if you blindfolded me lol .

  14. #14
    camngetit
    Guest
    once i have bypassed your fufu valve and put a bolt in the giggling pin the roundy roundy uppy downy things wont go as fast and a parrot on pedal bike will over take you let alone me lol

  15. #15
    mattblack
    Guest
    Quote Originally Posted by camngetit View Post
    once i have bypassed your fufu valve and put a bolt in the giggling pin the roundy roundy uppy downy things wont go as fast and a parrot on pedal bike will over take you let alone me lol
    Ha Ha Ha.

    How much is the Dr Rossi chip and what doe's it do

  16. #16
    darren smith
    Guest
    doesn't matter which chip you have in cos the powercommander overwrites it anyway. just use the standard chip. if you do the battery thing make sure you use a brand new good quality battery otherwise it won't work. (pp3 square battery)
    i didn't bother with the battery. you only need to start the bike and leave it ticking over to install a new map. you need to run the engine though, it won't work with just the ignition on.

  17. #17
    camngetit
    Guest
    Quote Originally Posted by mattblack View Post
    Ha Ha Ha.

    How much is the Dr Rossi chip and what doe's it do
    it doesnt turn you into valentino who eats butties:

  18. #18
    AMA Pit Boss
    Join Date
    Sep 2008
    Location
    Shoeburyness, Essex
    Posts
    2,338
    Not true , the power commander does'nt override the chip !!

    Quote Originally Posted by darren smith View Post
    doesn't matter which chip you have in cos the powercommander overwrites it anyway. just use the standard chip. if you do the battery thing make sure you use a brand new good quality battery otherwise it won't work. (pp3 square battery)
    i didn't bother with the battery. you only need to start the bike and leave it ticking over to install a new map. you need to run the engine though, it won't work with just the ignition on.

  19. #19
    DrRossi
    Guest
    Tell em Kiwi !
    With a PC you can easily adjust the injector timing thus the amound of fuel but not the ignition timing.
    With the Tuning Link software it's nice to get a good ATF in 30 minutes but there's more to it than the eye can see !!
    I don't know much people with a PC III Usb with a seperate map for cyl 1 and 2.
    The just stick the lambda in the exhaust and pray it's ok.
    Believe me there is a lot of difference between the workload of the cylinders.
    Last edited by DrRossi; July 9th, 2009 at 04:14 AM.

  20. #20
    mattblack
    Guest
    So whats my way forward then Gentlemen. I've bought a PC3, have a straight through stubby can, K&N filter's and Iridium plugs. Not looked at the chip yet. Which chip is best / most effective.

Page 1 of 2 12 LastLast

Similar Discussions

  1. Power Commander III USB for 98-03
    By Deacs in forum Classifieds
    Replies: 4
    Last Post: March 16th, 2012, 08:28 AM
  2. Rear seat part number DIS 110273
    By Adz in forum Aprilia RSVR
    Replies: 7
    Last Post: February 15th, 2012, 05:01 AM
  3. Power Commander custom map for Tuono/Mille
    By Moggi in forum Want to Buy
    Replies: 0
    Last Post: July 1st, 2011, 11:34 AM
  4. Part number...6261-560 ZB01-A-5-F
    By fuelline in forum Aprilia RSVR
    Replies: 4
    Last Post: January 18th, 2011, 01:19 PM
  5. power commander
    By jezza1 in forum Want to Buy
    Replies: 2
    Last Post: February 15th, 2010, 10:14 AM

Search tags for this page

Click on a term to search for related topics.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •