Page 1 of 2 12 LastLast
Results 1 to 20 of 24

Thread: 2004 Factory Mille For Sale/Breaking

  1. #1
    Baby Twin Fatbloke's Avatar
    Join Date
    Oct 2009
    Location
    Loooootun
    Posts
    10

    2004 Factory Mille For Sale/Breaking

    Hi guys, im a newbie on here and been told this may be of interest to you

    2004 53 reg Factory Mille for sale, unfortunately has crank problems

    I brought this 2 years ago and turned it into a race bike which I have used for the last 2 seasons.

    Bike spec is

    150 BHP 1060 big bore kit
    STM slipper
    Original Front brake MS
    Proper brembo clutch MS with scuffs after small off at Moto GP support race this year
    Akro cans
    Renegade air box mod
    Ohlins front forks serviced 3 meets ago
    Ohlins rear which needs service
    Oz wheels
    Gilles rearsets
    2 sets of scruffy race fairings
    PC3
    Pretty new SBS pads

    Needs donor bottom end or new crank and hey presto, 150 ponies to play with again. I currently sit in 4th in Supertwins champs in Thundersport gb. I have done some pretty good times on this bearing in mind its only my 2nd year racing.

    Bike also has V5 and lots of road bits which I dont want.
    Looking for £3000 for bike and old road fairings/ lights etc or will break if need be.

    Cheers Scot

  2. #2
    One Liter Duc Eater butch1276's Avatar
    Join Date
    Aug 2008
    Location
    salisbury
    Posts
    636
    Quote Originally Posted by Fatbloke View Post
    Hi guys, im a newbie on here and been told this may be of interest to you

    2004 53 reg Factory Mille for sale, unfortunately has crank problems

    I brought this 2 years ago and turned it into a race bike which I have used for the last 2 seasons.

    Bike spec is

    150 BHP 1060 big bore kit
    STM slipper
    Original Front brake MS
    Proper brembo clutch MS with scuffs after small off at Moto GP support race this year
    Akro cans
    Renegade air box mod
    Ohlins front forks serviced 3 meets ago
    Ohlins rear which needs service
    Oz wheels
    Gilles rearsets
    2 sets of scruffy race fairings
    PC3
    Pretty new SBS pads

    Needs donor bottom end or new crank and hey presto, 150 ponies to play with again. I currently sit in 4th in Supertwins champs in Thundersport gb. I have done some pretty good times on this bearing in mind its only my 2nd year racing.

    Bike also has V5 and lots of road bits which I dont want.
    Looking for £3000 for bike and old road fairings/ lights etc or will break if need be.

    Cheers Scot
    hi mate i wanna turn my 04 r into a factory so how much for your forks and ohlins goodies

  3. #3
    Baby Twin Fatbloke's Avatar
    Join Date
    Oct 2009
    Location
    Loooootun
    Posts
    10
    Just the front forks and rear shock?

  4. #4
    One Liter Duc Eater butch1276's Avatar
    Join Date
    Aug 2008
    Location
    salisbury
    Posts
    636

    wheels

    Quote Originally Posted by Fatbloke View Post
    Just the front forks and rear shock?
    prob the oz's too but im on the budget that is controlled by the blond one so......

  5. #5
    Evil Twin Nadz's Avatar
    Join Date
    Mar 2009
    Location
    Weymouth, Dorset
    Posts
    252
    Will this fit an 08 RSVR ? If so I'm interested in the PC3 if if your selling. PM me if you are

    Dont suppose you have a quick shifter aswell ?
    Last edited by Nadz; October 14th, 2009 at 04:19 AM.

  6. #6
    One Liter Duc Eater Deacs's Avatar
    Join Date
    Jun 2009
    Location
    Sunny Oxfordshire
    Posts
    888
    pm senth

  7. #7
    Baby Twin Fatbloke's Avatar
    Join Date
    Oct 2009
    Location
    Loooootun
    Posts
    10
    The PC3 will fit anything I believe. I do have a QS but will be putting it on the Gixer when I get round to it.

    Looks like I will be breaking the thing due to all the interest which will be gutting for me. Had some cracking races on this and really enjoyed riding it..........(trying a 2009 1098 at my last meet this weekend at Rockingham so will be a good comparison)

    Would still rather sell as a rolling chassis

  8. #8
    gaz
    gaz is offline
    One Liter Duc Eater gaz's Avatar
    Join Date
    Nov 2007
    Location
    liverpool
    Posts
    520
    Quote Originally Posted by Fatbloke View Post
    The PC3 will fit anything I believe. I do have a QS but will be putting it on the Gixer when I get round to it.

    Looks like I will be breaking the thing due to all the interest which will be gutting for me. Had some cracking races on this and really enjoyed riding it..........(trying a 2009 1098 at my last meet this weekend at Rockingham so will be a good comparison)

    Would still rather sell as a rolling chassis
    Oi cock head you could have waited till I sold my stuff 1st lol

    told ya you'd get interest on here bob

  9. #9
    Evil Twin RegisRSV's Avatar
    Join Date
    May 2009
    Location
    High Wycombe
    Posts
    258
    pm sent

  10. #10
    RIDDICK
    Guest
    pm sent

  11. #11
    Baby Twin Fatbloke's Avatar
    Join Date
    Oct 2009
    Location
    Loooootun
    Posts
    10
    Forks, wheels are not in the best nick but ok and rear shock...... bout a grand I reckon

  12. #12
    Baby Twin Fatbloke's Avatar
    Join Date
    Oct 2009
    Location
    Loooootun
    Posts
    10
    Renegade, PC3 and throttle bodies now sold so looks like im breaking it.......sob sob

  13. #13
    Evil Twin Nadz's Avatar
    Join Date
    Mar 2009
    Location
    Weymouth, Dorset
    Posts
    252
    Dont suppose you still have the right main light?

  14. #14
    Baby Twin Fatbloke's Avatar
    Join Date
    Oct 2009
    Location
    Loooootun
    Posts
    10
    Quote Originally Posted by Nadz View Post
    Dont suppose you still have the right main light?

    I have mate but i dropped it last night trying to find the left one which is sold and its cracked. Gis your email and I will send over pics, see what you think

  15. #15
    One Liter Duc Eater TarkMalbot's Avatar
    Join Date
    Jul 2007
    Location
    Carlisle, Cumbria.
    Posts
    523
    Shame you have had to break it. I was up for the whole thing as a race bike but I haven't had much joy selling my 600 yet.

  16. #16
    Evil Twin Nadz's Avatar
    Join Date
    Mar 2009
    Location
    Weymouth, Dorset
    Posts
    252
    Cheers but the one i have has a crack in from a stone chip. I'll PM you.

  17. #17
    Baby Twin Fatbloke's Avatar
    Join Date
    Oct 2009
    Location
    Loooootun
    Posts
    10
    Bike still needs breaking so if you need any bits let me know.

    Also got 2 sets of Brembo 5 spoke wheels sprayed this year in solid red with silver metallic rim tape. Both sets are straight with good Brembo discs and both fronts currently have the spacers fitted to fit the newer radial caliper models.
    1 set are just wheels
    1 set have very good treaded supercorsa's fitted which have had hardly any tracktime, they were my inters.
    Offers if your interested. Pics on request with an email add.
    In good condition but do have a couple of wheel change marks.
    Cheers

  18. #18
    One Liter Duc Eater Deacs's Avatar
    Join Date
    Jun 2009
    Location
    Sunny Oxfordshire
    Posts
    888
    hey Scot, was good to meet you matey

    Can highly recommend FB - standup guy and not Fat at all

    Deacs

  19. #19
    Baby Twin Fatbloke's Avatar
    Join Date
    Oct 2009
    Location
    Loooootun
    Posts
    10
    Cheers mate, good to meet you 2, have a safe drive home

  20. #20
    One Liter Duc Eater Deacs's Avatar
    Join Date
    Jun 2009
    Location
    Sunny Oxfordshire
    Posts
    888

Page 1 of 2 12 LastLast

Similar Discussions

  1. UK 2004 RSV 1000R Factory For Sale
    By Smemly in forum Classifieds
    Replies: 4
    Last Post: April 13th, 2013, 12:48 AM
  2. RSV,Factory R,2004,breaking.All available.Uk
    By Andy333 in forum Classifieds
    Replies: 23
    Last Post: September 6th, 2011, 09:53 AM
  3. 2004 RSVR factory for sale
    By vinny rsvr in forum Classifieds
    Replies: 26
    Last Post: October 19th, 2009, 10:23 AM
  4. 2004 factory for sale
    By dan.46 in forum Classifieds
    Replies: 4
    Last Post: September 1st, 2009, 06:59 AM
  5. for sale 2004 rsvr factory edwards-haga
    By kinfast in forum Classifieds
    Replies: 1
    Last Post: April 5th, 2009, 02:18 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •