Results 1 to 13 of 13

Thread: side stand

  1. #1
    Baby Twin
    Join Date
    Nov 2009
    Posts
    81

    side stand

    ok i cant find it but i'm sure i heard something about a 04-07 fireblade sidestan bolting straight on with no need to modify apart from in needing to be shorter..is this true or what else can i do to get rid of the poxy standard one

  2. #2
    Baby Twin
    Join Date
    Jan 2012
    Location
    South Africa
    Posts
    6
    Hi guys so the 2004 <> 2007 CBR1000RR Fireblade side stand fits, but I've cut the foot of mine and as the stand is hollow I 've screwed a 100mm M10 grade 10 bolt in from which i've cut off the hex head and welded a new foot onto it, and it works just great. It works on a gen 2 RSV , Falco and gen 2 Tuono.

    hope that this info is helpful

  3. #3
    Superbike Twin flatlander's Avatar
    Join Date
    Sep 2011
    Location
    cheshire uk
    Posts
    176
    Can be ordered new for 38-60 for the stand you can reuse the aprilia spring put it on the bracket first and if you can adjust ride height it may help avoid shortening at least that's what I've heard I'll try to look up the part number later

  4. #4
    Baby Twin schatzbank's Avatar
    Join Date
    Oct 2010
    Posts
    29
    My lovely wife got me the replacement stand for Xmas and I fitted it last weekend - fantastic, and a huge improvement. springs stay the same - the Honda stand just replaces the crappy Ape one. photos below show the part number...knock yourself out! I got sick of seeing my bike lying on the floor with people pointing at it as they drove past...

  5. #5
    Superbike Twin flatlander's Avatar
    Join Date
    Sep 2011
    Location
    cheshire uk
    Posts
    176
    That's the one I ordered for 38 new from the US same part number just hope it is actually the same

  6. #6
    Baby Twin
    Join Date
    Mar 2013
    Location
    Mountain Ash
    Posts
    25
    These stands second hand are like rocking horse sh*t....

    Any other stands that can be used?

  7. #7
    Baby Twin
    Join Date
    Mar 2013
    Location
    Mountain Ash
    Posts
    25
    Anyone got a tidy photo of their stand??

    I need a close up on bracket etc

    Local breakers reckon they got some cbr1000 stands but il have to look through a few boxes full to find the right ones!!!

  8. #8
    Baby Twin
    Join Date
    Jan 2013
    Location
    London
    Posts
    43
    Scotty,

    I fitted a 2004 Fireblade stand to mine but had to cut about an inch off and have the foot welded back on, as it stood too upright with the un modded Honda stand. See the piccies here:

    CBR1000 sidestand mod

  9. #9
    Baby Twin
    Join Date
    Mar 2013
    Location
    Mountain Ash
    Posts
    25
    Cheers

    Went to the breakers, it was an impossible task as nothing was labelled up, need to get the stand off and take it with me next time

  10. #10
    Superbike Twin
    Join Date
    Jun 2012
    Location
    Wolverhampton
    Posts
    157
    mine was a 'little' too upright still, 07 Factory, so i just bent it out a tad, so it leans over a little further, and the foot is a bit further out from the bike making it feel even more stable. little tug, try it, little tug more..

  11. #11
    Superbike Twin
    Join Date
    May 2013
    Location
    Scotland
    Posts
    229
    So what's the initial problem with the stand ?
    Too long or Ducati like self retract stuff ?

    Mike

  12. #12
    One Liter Duc Eater nikfubar's Avatar
    Join Date
    Dec 2009
    Location
    Always pissin down with rain Sussex
    Posts
    663
    Some are too long, some are too short Mine was to short & the bike leant over far too much so I cut the stand & welded a piece in, extending it by about 15mm

  13. #13
    Superbike Twin flatlander's Avatar
    Join Date
    Sep 2011
    Location
    cheshire uk
    Posts
    176
    the stands are too centrral and the bike stands up too much so is prone to falling over. The replacements vary, at least on the Falco, GSXR Honda - various, US sidestand for the same bike were different and more sturdy. The Honda I think is the CBR1000 from 2004-2007 though I believe a VTR and a Blackbird may fit with frettling.

    HTH

Similar Discussions

  1. side stand
    By lagger in forum Aprilia RSVR
    Replies: 2
    Last Post: September 17th, 2012, 11:11 AM
  2. side stand
    By lagger in forum Aprilia RSVR
    Replies: 5
    Last Post: August 28th, 2012, 05:42 AM
  3. side stand
    By a.darcy in forum Aprilia RSVR
    Replies: 23
    Last Post: January 22nd, 2012, 03:00 AM
  4. New side stand
    By theduke in forum Aprilia RSVR
    Replies: 2
    Last Post: March 21st, 2011, 02:11 AM
  5. side stand
    By kirky in forum Aprilia RSVR
    Replies: 2
    Last Post: July 28th, 2008, 12:38 AM

Search tags for this page

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •